Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 23.06.2025 01:37

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

What are the main issues that have historically and currently divided Republicans and Democrats?

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

He then describes Rainy Season and Lightning.

At least they know the answer if they wanted it.

Two Galaxy Clusters Are on a Collision Course, NASA’s Chandra X-Ray Observatory Reveals - The Daily Galaxy

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Can certain diseases cause paranoia similar to that seen in individuals with paranoid schizophrenia, even if they do not have the disorder?

One

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

so, what happens?

How an unnoticed pregnancy complication almost ended a young Staten Island mom’s life - SILive.com

2024–10–16 [ OO OLAOYE OYEBODE ]

a photo is worth a thousand words.

Barnstars:

What is Rejuran treatment, and how does it benefit the skin?

nine

The MOV will conduct when the voltage exceeds 50% of line voltage.

He then asserts :

Liverpool FC parade crash injured rises to 109 - BBC

An AC voltage/ current source, and an ac inductive load.

This device then solves the entire problem.

2024–10–10[John johnson John Johnson ]

Why do I get bored with porn so quickly? I can watch maybe half a video (5 mins max) and then get bored and do something else. I don't watch porn often, just a teenager. 17.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

One is “what exactly is in a ‘surge protector’ ? ”

What does K mean in Vietnamese?

What is lightning?

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Need For Speed Underground 2 remake leaves fans absolutely floored - GAMINGbible

In schematic diagrams this is the symbol for a fuse:

The other is “what does a “fuse” do?”

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Let’s say you have 3 separate manuscripts and send 1 of them to 12 different agents (4 read same copy). Now let’s say 2 agents each liked separate manuscripts and want to move forward. What would you do as far as transparency and negotiation?

These are simplified answers to the original question, and does not change anything I wrote above.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

These devices are installed between the “hot” and “neutral” and protective ground.

John Isner now ranks where Carlos Alcaraz's win over Jannik Sinner sits in the best matches ever, 'I'm changing my tune' - The Tennis Gazette

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

He then describes the function of a fuse.

[old diagram got deleted by accident]

Hundreds of Mysterious Giant Viruses Discovered Lurking in The Ocean - ScienceAlert

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

(Dc diagram shown, AC is similar).

Do handsome guys intimidate women or people in general?

The third is lightning and “how it gets conducted into a home.”

At one ohm, the resistor has a maximum of 1 watt power.

A circuit breaker is similar, but is resettable.

What do you think about Matt Gatz as an attorney general?

but I think this circuit , shows a few more pieces.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Now when you have a certain ac resistance, then a current flows in a loop.

3 keys to success every Citadel intern learns their first week on the job - Business Insider

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

what exactly is a ‘surge’ protector?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

This is where the MOV conducts again, and dissipated the energy.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

First Sentence:

This one hit behind the barn.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

I post the exact comment here.

2024–10–14 [Omar Gharbi Omar Gharbi ]

Upvotes:

Here is a simplified AC power diagram.

It also is a device that limits the change in current flow.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

This is where this question deviates from being a 'generic' question, and becomes more specific.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

The bolt then partially travels down the line to your home.

the problem then depends on "how fast does the fuse operate?".

But it can get overloaded, and no longer works.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

[image of Common-mode choke]

Edit 2024–10.

There are three different concepts here that are getting confused.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

What does a fuse do?

There are two important concepts here.

eight

For this case there are devices called Metal oxide varistors (MOV).

but this device (an Inductor) … impedes the rapid changes in the current.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

It seems Mohan does not understand the difference between a comment and an Answer.

A fuse is a non-resetable over current circuit protector.

This is 'the assistant's answer'

But… the neutral is now “floating” because of the 1 ohm resistance.

So, the voltage could go up to 500 volts, and the fuse will not open up.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Because the load is inductive, the current lags the voltage.(by a bit).

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.